Foam is a revolutionary spray on water delivered resin ceramic sealant which combines advanced protective polymers with fluoropolymers to deliver gloss boosting and protective properties to your entire exterior surface in seconds. Foam offers instant durable protection in seconds to every surface that is coated with the product on the exterior of the vehicle.

• Innovative built-in gloss and slickness enhancers.
• Coats and protects every exterior surface.
• Extreme concentrations make up to 5 litres from a single 500ml bottle.

The real advantage of Foam is the immense hydrophobic and self-cleaning effect that is delivered immediately, together with an intense gloss and clarity to painted surfaces.

For a product with such ease of application across many surfaces, which does not even require a simple wipe off, Foam remains durable, keeping its full hydrophobic effect for between 8 12 weeks.

Foam can be used on all surfaces from Paint, Glass, Plastic, Wheels to Brake Calipers and will leave a highly water-repellent coating that protects the surface from everyday contamination as well as most acid and alkaline solutions, whilst at the same time offering significant UV protection.

We have also included one major new factor and this being the double rinse formula. Once you begin to rinse Foam you will notice the water repellency increase with every pass. This was built into the formulation to give you an extra layer protection against water spotting and allowing you extra time as you are rinsing. Once the full rinse has been finished, you will be left with gloss, slickness and depth in the paint that usually does not come with inorganic product types like this. This is due to us using a special polymer that is normally found in high gloss and slickness formulation waxes. This is a first of its kind product that leaves the paint looking and feeling as though you have used multiple products.

Our high concentrate formula is dilutable by 1:9 in a Foam Cannon creating 5 litres of ready to use sealant from a 500ml bottle. If you are using Foam more regularly, 50ml of product can be used to 950ml of water in your Foam Cannon to consistently top up your protection.

The exact same dilution ratios are also used if you wish to use this product via a spray bottle and short stubby gun combination. We of course recommend to use the Pressol Household bottle with our Foam Labelling solution to apply the product in the very best and most even way.

Our special pre-wash formulation makes this contactless treatment chemically perfect, and most importantly, safe. One of the main differences in our pre-wash is that we have dramatically reduced certain lubrication agents to allow for an increase in extra cleaning properties.

• Safe to use on all painted, vinyl and glass surfaces.
• Will not strip existing wax or sealant protection.
• Emulsifies dirt and grime, enabling it to be gently lifted off the surface during the rinse stage.

The vision for our foaming pre-wash, was to create a formula with the highest possible raw material content, up to the maximum threshold. This will allow one of the most essential steps prior to the contact wash to be completed as effectively as possible, but whilst also retaining its pH level of 7, to not compromise existing protection.

Another key advantage of Yum Foam is that it does not reactivate during the rinsing process, meaning it rinses clean without any need for additional rinsing passes.

Because of the pH neutrality of this product, Yum Foam will not compromise any protective layers such as Waxes, Sealants and Ceramic Coatings. It is also safe to use on engine bays, tyres, trims, rims and alloy wheels.

Instructions

We always recommend rinsing the vehicle first, prior to application of Yum Foam, to assist with the removal of stubborn dirt.
We highly recommend to spray the lower areas of the vehicle first with Yum Citrus prior to applying our Foam as they work hand in hand together.
Pour 100ml-150ml of Yum Foam into the MTM PF22.2 Foam Cannon and the remainder with water We find this to be the optimal mixing ratio for the best results.
Cover the entire vehicle, leave to dwell for 5-10 minutes and rinse off, starting top to bottom.
Begin the contact wash stage using Yum Wash.