Vacuum-mount roof rack lets you mount accessories on a vehicle with a naked roof
Great for use on rental cars when traveling
2 Round crossbars work with most clamp-on accessories
Screw apart for compact storage in your trunk, garage, or suitcase when not in use
Vacuum cups install to metal, glass, or fiberglass in seconds – simply pump plungers
Black aluminum crossbars resist corrosion
Customizable crossbar spread lets you carry gear of various size
Made in the USA.

Description

Monkey Bars are the perfect solution for adding a roof rack to your vehicle with a naked roof.Vacuum cups attach in seconds to the roof, trunk, or glass on your car, SUV, van, motorhome, ortrailer. Because they don’t require a permanent installation, the Monkey Bars are great fortransporting gear when you’re traveling by rental car. And if you’re worried that vacuum cupswon’t stay attached to your vehicle, you can rest assured because each vacuum cup provides210 lbs of suction, giving you a total of 1,260 lbs of pull strength. Your gear isn’t going anywhere!Additionally, the rack stores easily in your trunk or garage when not in use, or in your suitcasewhile traveling.

Monkey Bars are compatible with most accessories that clamp around roof rack bars, includingbike, ski, water sports, and cargo carriers. Vacuum cups allow you to put the front and rearcrossbars anywhere, so you can customize the crossbar spread to fit your accessory. This alsoallows you use the crossbars to carry kayaks, lumber, and other longer items as well as cargobaskets, luggage, and other shorter items.

The bars screw apart in the middle. For compact storage, simply unscrew them and store them inyour trunk, garage, or even in your suitcase if you’re traveling or using a rental car.

Specifications

Specs:

Color: Black AluminumWeight capacity: 150 lbsPull strength: 1,260 lbsPer cup: 210 lbs
Crossbar dimensions (each): 48″ long x 1-1/4 diameter
Bar diameter: 1.3/33mmTotal rack weight: 12 lbs
Bar diameter: 1.3/33mm
The Monkey Bars are Black round aluminum cross bars. Thisallows you to easily attach accessories for activities such as kayaking, skiing,surfing and paddle boarding, biking, or hauling cargo. Powered by 6″ SeaSuckervacuum mounts (4 up front and 2 in the rear), the Monkey Bars fit on just about anycar with a roof. Have a wide or narrow roof? No worries, the vacuum mounts can bemoved to any position on the bar to ensure a perfect fit for any vehicle.

Installation

Installation Video

Installation Guide

The SeaSucker Monkey Bars are quick and easy to mount. To install them, make sure themounting surface is clean and place them on your roof, trunk, or window glass then press thepumps several times until the orange bands disappear. Depending on the surface they’remounted to and the load being put on them, suction in the cups will decrease over time. Makesure to check the plungers before you get into your vehicle. When you see the orange indicatorbands show simply re-pump the plungers.

To break the seal on each cup and remove the rack from your vehicle, simply pull the T-shapedtabs up and towards the center of the cups – it’s that easy. Remove the body and vacuum cupsand store them in your trunk or garage, or put them in a storage bag or suitcase to take with you.

DISCLAIMER: *EVANNEX is not responsible for any damage toyour vehicle during installation, use or removal.