Lensun hood solar panelmounts to the hood/bonnet of your vehicles. And charge the vehicle battery, leisure battery, or power station(jackery, goal zero…etc).

Keep your fridges, lighting, phones, cameras, radios, etc everything else charged. Do not worry about a dead battery while camping/off the grid.
Perfectly shaped for the hood of the vehicle. Easy to install plug-and-play wiring.

Lensun Hood Solar Panel Feature:
1. Keep your vehicle battery or auxiliary battery topped up all the time without the need to start your engine. Your battery will charge every time your vehicle is parked in the sun, run your fridge, and recharged all electronic devices and lights. Without worrying about a dead battery while out exploring.

2. Keep your power station charged, the solar panel come with standard solar connectors, use adaptors(buy separate) charge for most of the power station on the market, Jackery/Goalzero/Suoki/Flashfish…etc.If you are not sure which adapter to use please contact us.

3. Decreased hood glare. The surface of the lensun hood solar panel is a high-quality ETFE film, which will not reflect light. And because of the solar panel’s light absorbing properties, the decreased glare while driving.

4.Convenience and space saving.The hood solar panel adheres directly to the vehicles hood, requiring no roof rack or mounting hardware. The complete plug-and-play system can be installed easily. Unlike a portable solar panel, theres no need to set it up or stow it inside of a vehicle, which can eat up precious cargo space.

5. Protect and extend battery life As a result, our batteries are only at about 60% charge at best if you drive it daily, if you park it for 2-3 weeks it wont start in the summer. Also, the battery goes bad in 2-3 years. Lensun hood solar panel keeps the vehicle battery charged to maintain the battery.

6.The optional Plug-and-play 10A Waterproof MPPT solar charge controller, has been pre-wired with fuses, terminals, and connectors.The Solar charge controller is based on a common negative design and advanced MPPT control algorithm, with intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.

This solar controller iscompatible with Various Battery options: Sealed, AGM, Gel, Liquid, andLithium-ion.

7.The optional custom-fitted vinyl decal protects the vehicle paint from damage. Highly suggests using a vinyl decal between the solar panel and hood.

Electrical Information:
Peak power: 100W
Solar cell efficiency: 22.5%
Maximum power voltage: 21V
Maximum power current: 4.76A
Open circuit voltage: 24.78V
Short circuit current: 5.23A
Power allowance range: +/-3%
Maximum system voltage: 500V
Net Weight: 3.5kg/7.7 lbs
J-Box: IP 68 rated with 2m/6.5ft cables andstandardconnectors
Values at standard test conditions: Air Mass – AM1.5, Irradiance – 1000W/m2, Cell Temperature – 25C