4000 Series disc brake rotors are a direct replacement single-piece brake rotor, designed for drivers seeking upgraded performance braking above and beyond standard OE levels.

Cast from high-carbon alloyed iron and undergoing Thermal Stability Profiling, DBAs metallurgy can handle the increased stress and heat generated under intense braking applications, time and time again.

Featuring DBAs Kangaroo Paw ventilation that implements a series of 144 diamond and teardrop patterned pillars, DBA achieves up to a 30% increase in surface area and 20% improvement in cooling efficiency (as compared to a traditional straight vane design).

1 – SURFACE DESIGN
Symmetrical slots and/or chamfered drill holes facilitate the exit of friction dust and gases, for a quieter and more responsive pedal feel.

2 – ANTI RUST
Painted non-friction areas to prevent rust and enhance appearance.

3 – BI DIRECTIONAL USE
Symmetrical slotting and/or drilling for universal left/right use.

4 – THERMAL STABILITY PROFILING
Heat treatment cycles realign the microstructure of the iron, resulting in increased rotor stability and durability.

5 – THERMAL EFFICIENCY
Centre split core castings for increased heat transfer and thermal efficiency.

6 CBN
CBN (Cubic Boron Nitride) machine turned finish, minimising disc thickness variation and the potential for pad knock, and resulting in premature wear.

7 – THERMOGRAPHIC HEAT PAINT
Paint markings change colour at specific temperature thresholds to assist with the monitoring of braking temperatures and rotor fatigue.

8 – HIGH CARBON ALLOYED IRON
The formulation allows for optimal interaction with DBAs thermal stability profiling (TSP). Increases the capacity of the rotor to handle constant and extreme heat over prolonged periods.

9 – KANGAROO PAW
Unique Kangaroo Paw vane design for up to 20% better heat dissipation, increasing braking effectiveness, and prolonging brake life.

*Some variants may not contain all features

• DBA 4000 Series Front Brake Rotor Set (2)
• Heat Treated
• Slotted
• Diameter 320mm
• Thickness 32mm
• Height 43.5mm
• Minimum Thickness 29.8mm

Vehicle Compatibility:

– Mitsubishi Lancer EvolutionV CP9A (4G63T)
– Mitsubishi Lancer EvolutionVI CP9A (4G63T)
– Mitsubishi LancerEvolutionVII CT9A(4G63T)
– Mitsubishi LancerEvolutionVIII CT9A(4G63T)
– Mitsubishi Lancer Evolution IX CT9A (4G63T)