Designed to enhance and protect your calipers.
Our caliper paint is formulated for high heat performance applications.
Trusted by DIY and professionals alike.
Beautiful in appearance, and strong enough to withstand the punishment of road debris and temperature extremes.
Only includes an 8.0 Fl Oz. can of red paint.
To be used in conjunction with our Super Starter Kit for Caliper Paint.
Protection against rust and corrosion.

*Note: This product is not eligible for the Lifetime Replacement Program.*

Description

Our red caliper paintis a great way to upgrade your vehicle calipers and give your EV a “performance” look. Not only does this coating look like an expensive ceramic finish but provides years of protection against rust and corrosion.

Our red break caliper paint is formulated to provide a tough and attractive coating that will satisfy even themost demanding car enthusiast. The paid has excellent coverage properties and will withstand temperatures up to 500F.

Red Caliper Paint for EV Owners is applied using the paint brushed and preparation materials provided in our Super Starter Kit for Caliper Paint that can be purchased separately.

Note: Be sure to mask all nearby surfaces and to wear a proper respirator when applying paint.

Specifications

With superior heat and chemical resistance up to 500F when cured properly,Our Caliper paint will make the difference between a quick and short-lasting job to one that will make your vehicles calipers pop, looking great and will lasting for years to come.

For best results, we recommend using Caliper Painting Prep Kit before applying Caliper Red Paint.

Trusted by DIY and professionals alike.
Superior chemical and heat resistant coating, withstand up to 500F.
Only includes an 8.0 Fl Oz can of red paint.
Durable finish and excellent coverage.
Product made in America.

Installation

Installation Guide

When used properly, our caliper paint offers a superior, and lasting finish. For unbeatable results, the working area should be cleaned and prepped thoroughly. POR-15 CleanerDegreaser, Metal Prep and Rust Preventive Coating will provide a long-lasting finish while preventing rust and corrosion.

IMPORTANT: To properly apply Red Caliper Paint and achieve long-lasting, high-quality results, you will also need the following items, available in our Super Starter Kit for Caliper Paint: (1) two small paint brushes, (2) a pair of high-dexterity surgical latex gloves, (3) POR-15 Cleaner Degreaser, (4) POR-15 Metal Prep and (5) POR-15 Rust Preventive Coating (gloss black).

Installation Instructions

Step 1:Remove all four wheels from the vehicle. Calipers dont need to be removed. Do not remove the brake line.

Step 2:Clean surfaces to be painted with POR-15 Cleaner Degreaser. Spray on the cleaner and brush the dirt, grease and grime with a small scrub brush ortoothbrush. Wear protective gloves and glasses when cleaning your calipers. Read directions on POR-15 Cleaner Degreaser container before using.

Step 3:Rinse the cleaned caliper thoroughly with water and allow to dry completely. Now apply POR-15 Metal Prep and keep surface wet for 20 minutes and then wash offPOR-15 Metal Prep with water and dry thoroughly.

Step 4:Mask off the areas not to be painted. Tape off the brake bleeder screw, brake lines, caliper piston boots, and anything else you dont want to be painted. This step is VERY important and should be performed with care. When in doubt, mask a surface, even if it is not immediately adjacent to the work area.

Step 5:Open the small can of POR-15 Rust Preventive Coating and stir, making sure the contents are thoroughly mixed. Using a foam brush (included in your kit) paintthe caliper evenly, making sure the coating is evenly applied but not to the point where the paint runs. Because this is a rust preventive coating you want to be sure youdont miss any spots which could rust later if not covered.

Step 6:When the POR-15 Rust Preventive Coating is just dry to the touch, with slight finger-drag remaining, normally in the 2-5 hour range, its ready for the POR-15 Red Caliper Paint to be applied. Open the can of POR-15 Red Caliper Paint, stir thoroughly, and apply the first coat in thin but even strokes. When the first coat is dry (3 -4hours), apply a second coat to achieve a beautiful ceramic-like finish.Let dry 24 hoursbefore reassembling wheels and operating you vehicle.

Note: These products should only be handled when wearing latex gloves, eye protection, and NOSHA approved respirators. Always work in a well-ventilated area.

FAQ

Is the break caliper paint heat resistant?

Yes. Our caliper paint is formulated for high heat performance applications. Caliperpaint will withstand up to 500F.

Is the caliper paint sold as a complete kit?

No. It only includes an8.0 Fl Oz can of red caliper paint. Westrongly recommend to purchase the proper implements for a successful and appropriateapplication ofour red caliper paint. You will need :

Two small paint brushes, Pair of high-dexterity surgical latex gloves, POR-15 Cleaner Degreaser,POR-15 Metal Prep andPOR-15 Rust Preventive Coating.

Will adding the caliper paint affect caliper breaks in any way?

No. The caliper paint is intendedenhancethe look of your break calipers.