Fits: 6th Gen 4Runner

What It Does

• Fixes that sketchy, side-to-side axle swing after a lift.

• Brings your track bar (panhard bar) back to a more natural, level position.

• Keeps your rig tracking straight, planted, and predictable on-road and off.
  Bolt-on design no welding, no guesswork.
  

• All brackets have the potential to contact frame under suspension cycle this can be addressed with longer bump stops or bump stop drop . Or get the shorty !

Why It Matters

• When you lift your rig, the track bar angle gets steep. That forces the axle to swing left/right instead of moving up/down making the rear feel unstable.
• The B.O.T.C.K. raises the pivot point to flatten that bar and bring your handling back to normal. Simple fix, huge difference.

Shorty vs. Regular Pick the Right One

How to Pick the Correct B.O.T.C.K. Version

1. Park on level ground.

2. Measure from theground to the center of the frame-side track-bar bolt.

3. Measure from theground to the center of the axle-side track-bar bolt.

4. Subtract the two measurements to find yourbolt-height difference:

• 1.5″2.99″ Shorty Version(or use the bottom hole on the Standard bracket)

• 3″ or higher Standard Version(use the top hole)

Planning to lift higher later?Go with theStandard Version it gives you extra mounting options as your suspension height changes.

Updates You Need to Know

• No more flange nuts now standardhex nuts.

• Washer for side bolt no longer needed.

Real Talk

• Stop buying parts you dont need understand what it does before hitting checkout.

• This kit isnt just stronger than weld-on options it spreads load evenly across the OEM mount instead of depending on the welds.

• Designed for rigs that actually see dirt, not just mall crawlers.
  

Whats Included

• Front bracket

• Back bracket

• Flagnut

• (1x) M14 x 1.5 x75mmflange head bolt

• (1x) M14 x 1.5 x 80mm flange head bolt

• (1x) M14 x 1.5 x 35mm flange head bolt

• (1x) M14 x 1.5 x 30mm flange head bolt

• (1x) M14 hex nut

• All hardware is zinc coated

Fulfillment Time: Please allow 3648

UPDATED: (Torque bolts to 105 ft lbs oem bolt location 120-125lbs on the rest . Use blue loctite or very little red )