eAuto Trusted by Mechanics. Built for Riders.

eAuto Fuel Pump Assembly for Hero Pleasure Plus BS6 / Destini 125 BS6 / Maestro Edge 125 BS6 (2020Present) | FI Scooter | OEM Ref: 16700-AAL-901

Hero launched the Pleasure Plus and Destini 125 with Programmed Fuel Injection (PGM-FI) and BS6 compliance in JanuaryFebruary 2020, making them among India’s first BS6-compliant FI scooters. This eAuto assembly covers the complete family Pleasure Plus BS6, Pleasure Plus XTEC, Destini 125 BS6, Destini 125 XTEC, Destini 125 Prime, and Maestro Edge 125 BS6 all confirmed to share Hero Genuine Part No: 16700-AAL-901. Every unit is tested for correct fuel pressure and electrical function before dispatch from .

eAuto Key Specs: 110124.6cc Air-Cooled FI BS6 | OEM Ref: 16700-AAL-901 | 2020Present | Pleasure Plus / Destini 125 / Maestro Edge 125 | Complete In-Tank Assembly

eAuto Verified Fitment Fits These Models

OEM Reference: 16700-AAL-901 / 16700AAL901S (Hero Genuine). Confirm fitment against your bike’s model code if in doubt.

Does NOT Fit Do Not Order For These Models

Technical Specifications

FAQ

Q: Does this fit both Pleasure Plus and Destini 125?

A: Yes. Both models use Hero OEM part 16700-AAL-901 confirmed via Hero Genuine Parts catalog. The Pleasure Plus (110cc) and Destini 125 (124.6cc) share the same in-tank fuel pump assembly design.

Q: Does this fit the Destini 125 XTEC and Prime?

A: Yes. The XTEC and Prime variants add connectivity features and styling updates the fuel tank and pump assembly are unchanged across all Destini 125 BS6 variants (OEM 16700-AAL-901).

Q: Will this fit the old Pleasure (carburettor)?

A: No. The pre-2020 Pleasure used a carburettor no fuel pump. This is for BS6 FI models only (2020 onward).

Q: Hero Pleasure Plus / Destini 125 ?

A: Hero Pleasure Plus BS6, Destini 125 BS6, Maestro Edge 125 BS6 OEM Ref: 16700-AAL-901. Free shipping* COD* | Available at pan-India.

Q: Does this fit the Maestro Edge 110 BS6?

A: No. The Maestro Edge 110 BS6 uses a different pump. This assembly is specifically for the Maestro Edge 125 BS6 and the Pleasure Plus / Destini 125 family (OEM 16700-AAL-901).

When to Replace

Watch for these warning signs on your Pleasure Plus or Destini 125 BS6. As high-frequency urban scooters, pump wear typically shows up gradually before complete failure.

• Hard starting or repeated cranking Scooter cranks but won’t start; most common on cold mornings or after sitting overnight.
• No priming buzz on ignition Turn key to ON; listen for a brief whirr from under the floorboard. No sound = pump motor failure.
• Stalling at idle or in slow traffic Pump dropping pressure at low rpm; very common on high-mileage urban scooters.
• FI warning light on instrument cluster ECU fault code triggered by fuel delivery irregularity.
• Power loss or hesitation on acceleration Pump unable to sustain pressure under load.
• Unexplained drop in mileage Inconsistent fuel pressure affecting injection timing and atomisation.

Mechanic Tip: Urban scooters like the Pleasure Plus and Destini 125 are frequently run with low fuel levels in city use this forces the pump to work harder and accelerates strainer clogging. Always replace the complete assembly (motor + sender + strainer), not just the motor alone.

Installation Notes

Tank Access: The pump is mounted inside the fuel tank beneath the seat/floorboard assembly. Drain fully and remove the tank before starting. Refer to the Hero service manual for your specific model for correct draining and removal procedure.

Pleasure Plus XTEC / Destini XTEC: The connected features, Bluetooth, and LED DRL on XTEC variants are separate from the fuel delivery system. Pump assembly and installation procedure are identical to standard BS6 variants.

Destini Prime (2023+): The Prime variant styling and feature updates do not affect the fuel tank or pump. This assembly fits all Destini 125 Prime variants identically.

OBD2B variants: OBD Phase 2B is an engine management software update the fuel tank and pump hardware are unchanged. This assembly fits all OBD2B Pleasure Plus and Destini 125 variants identically.

eAuto Fitment Guarantee: Verified for Hero Pleasure Plus BS6 / XTEC, Destini 125 BS6 / XTEC / Prime, Maestro Edge 125 BS6 (2020Present). OEM Ref: 16700-AAL-901. Contact eAuto at if unsure about your variant.Available pan-India: Delhi, Mumbai, Bangalore, Chennai, Hyderabad, Pune, Kolkata and all pin codes. Free shipping* + COD* at . eAuto Trusted by Mechanics. Built for Riders.

*Always verify your exact model, variant, and year before ordering. *Shipping and COD availability subject to serviceable pincodes. eAuto Trusted by Mechanics. Built for Riders. |