Dry Lube is a fast drying and silicone free lubricant that leaves a high-quality lubricating and sliding film on the treated surface. Thanks to its unique composition, this product provides a dry and almost invisible antistatic layer, thus greatly reducing stick & slip resistance.

This dry-film lubricant is a dispersion of colourless, waxy polytetrafluoroethylene (PTFE) that, after evaporation of the solvents, leaves an almost invisible and completely dry layer of sliding lacquer. Dry Lube can be applied to the most frequent surfaces such as ferrous and non-ferrous metals, wood, plastics, textiles, etc. This multi-purpose product is perfectly suitable for conveyer belts, dashboards, slides, machine parts etc. Moreover it is ideal to lubricate places where the attraction of dust and dirt is to be avoided in order to prevent malfunctions or accelerated wear.

Dry Lube is not sticky and does not stain, therefore it is also suitable to lubricate critical areas such as micro bearings in electronics, all hinges in car interiors or dovetail joints in fine mechanics.

• Base:Fluoropolymer
• Density:604 kg/m
• Consistency:Liquid (ready-to-use in aerosol)
• Solvents:Aliphatic hydrocarbons
• Flash point:< 0C
• Temperature resistance:-60C to +280C
• Water resistance:Good
• Solvent resistance:Not resistant to solvents
• Acid resistance:Very good. Also thoroughly tested against hydroxides such as nitric acid, hydrochloric acid, 30% potassium hydroxide, 30% sodium hydroxide.
• Tests:Registered by NSF (class H2), register number: 144035
• Application conditions:-15C to +40C
• Type of surface:Dry Lube can be applied to the most frequent surfaces such as ferrous and non-ferrous metals, wood, plastics, textiles, etc. This multi-purpose product is perfectly suitable for conveyer belts, dashboards, slides, machine parts etc. where the attraction of dust and dirt is to be avoided.
• Surface preparation:The surface must be clean, dry and free of dust and grease. Clean the surfaces with InnotecMultisol.
• Application method:Shake can well during 2 minutes before use. Spray the product directly on the surface to be treated (spraying distance 15-20 cm). For best results, apply several thin layers.
• Dust dry:After 5 to 10 minutes (at 20C)
• Cleaning of materials used:With InnotecMultisolor InnotecPower Clean
• Cleaning of hands:With InnotecPower Scrubsor with InnotecSafe Hand Clean Plusand water
• Shelf life:2 years in original, unopened packaging
• Storage conditions:Store cool and dry
• Type of batchcode:F
• EAN Code:5400563015551