Black

Corrosion inhibitor that forms a viscoplastic, closed protective film when dried. The coating material containing bitumen has a good anti-drum effect and high abrasion resistance. High solids content. Cannot be painted over.

For covering paint mist in the wheel arch and for touching up or supplementing existing coatings on underbodies.

Application

Surfaces which are to be treated must be thoroughly cleaned beforehand. Rust must be removed. The surfaces must be dry and free of wax, dirt and grease and extensively free of dust.

The material is best suited for use at room temperature. Shake can vigorously. When the ball has worked loose, continue to shake the can for a further minute. Hold the can vertically when spraying and spray thinly at a distance of about 2030 cm from the surface. The resistance to abrasion and corrosion increases with increasing coating thickness. For this reason, the spraying process should be repeated once or twice after a short flash-off period. Underseal spray should be sprayed using a cross pattern to avoid spray shadowing.

Other information

After use, the can must be inverted and sprayed until the valve is clear of the product with only propellant escaping.

Attention
Do not spray material onto moving parts and hot components such as mechanical joints, the engine, transmission, cardan shaft, exhaust pipe, catalytic converter and brake systems. Cannot be painted over!

• outstanding rigidity
• good corrosion protection
• protects against aggressive environmental influences
• covers paint mist
• high abrasion resistance
• stone guard